|
¡@
|
TRP-C08S
USB 2.0 to 1*RS-232 and 1*RS422/485 Isolated Converter |
| ¡@ |
 |
|
|
 |
|
|
 |
|
|
 |
| |
 |
|
Introduction |
¡@
The TRP-C08S is one standard USB 2.0 to
Serials
Bridge that has one DB-9 RS232 male connectors and 4 PIN screw
terminal for RS422/485. The DB-9 pin serial port is configured as a
DTE (data terminal equipment) device which is same as all PC COM
ports. The RS422/485 with auto
configuration in data format, baud rate and RS485 data flow direction
control. RS422/485 equips with 3000VDC of isolation and internal
surge-protection on each data line, it gives the host computer and
module itself entirely protection from destructive voltage spikes and
danger of unregulated voltages input. TRP-C08S also features a
high-speed 921.6 K
bps transmission rate, and supports various O.S. The industry
DIN rail and
panel mounting
design enable
user a
fast and professional
installation.
|
¡@ |
|
Features |
|
¡@
-
USB-2.0 Device Controller
-
OS. system get dual
port UART serial (1*RS232 and 1*RS422/485).
-
On-Chip 512-Byte FIFO for upstream and downstream data
transfers for serial Port.
-
Fully PLC support such
as Mitsubishi Q,FX and FATEK serial....
-
Auto
direction flow control on RS-485.
-
Auto
baud rate switching from
75bps to
921.6 Kbps.
-
256
byte buffer for upstream and downstream data flow.
-
Direct
power from USB port , no external power necessary.
-
3000V
DC isolated protection.
-
Surge
protection on RS422/485 data lines.
-
Power and
TXA/RXA/TXB/RXB communication LED indicator .
-
DIN
rail or panel mount support.
-
Driver
support: Vista64/32,Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS.
¡@ |
|
Specifications |
|
¡@
-
Input: USB 2.0.
-
Output: RS232 signal: Standard 9 pin DTE full-duplex.
-
RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
-
RS485 signal: Differential 2 half-duplex wires (D+, D-).
-
Optical Isolation:RS422/485 3KV.
-
Data Format: Asynchronous data with any combination of bits, parity, stop
-
Parity type: None, odd, even mark, space.
-
Data bit: 5, 6, 7, 8
-
Stop bits: 1, 1.5, 2.
-
Flow Control: Xon/Xoff, Hardware, None
-
Cable: USB 2.0 type A to type B cable.
-
Communication speed:75~256Kbps.
-
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
-
RS232 line protection: +/- 15KV ESD.
-
Distance: RS422/485 Up to 4000ft (1250M).
-
Connection type: Screw terminal for maximum AWG #12~30 wire.
-
Din-Rail mountable: Option.
-
Power consumption:130mA by USB power.
-
RS422/485 Optical Isolation: 3000V DC.
-
Operating environment: -10 to 50¢J.
-
Storage temperature: -20 to 65¢J.
-
Dimension: 151mm X 111mm X 26mm.
-
Weight: 375g.
-
Humidity: 10-90% non-condensing.
|
|
Accessories |
|
LI-USBH-A/B |
1.8M
USB 2.0 A to B cable
|
 |
| T-snap
(Option) |
DIN rail mounting adapter (Option) |
 |
¡@
|
