TRP-C06E

TRP-C06E RS-232 to RS-422/485 None Isolated Converter





Introduction
The TRP-C06E allows RS-232 devices to connect directly to an industrial isolated RS-422 or RS-485 network and transmit data up to 1.2KM . Featuring automatic baud rate detect function just plug in the unit and go without software or hardware changes. The RS-485 control is completely transparent to the user and software written for Half-Duplex RS-232 works without any modification. The TRP-C06E also provides current and voltage to protect the host computer from ground loops and destructive voltage spikes on the RS-422/485 data line. This is recommended over longer cable runs or where ground potential differences can occur between host and client devices. Industry standard DIN rail or panel mount options enable fast and professional installation
Feature
No external flow control signals required for RS-485.. Auto switching baud rate up to 115.2 Kbps. Over current protection . All RS-422/485 signals provide surge protection . Power/TX/RX mode LED indicator. Support standard external DC power adaptor. Power input requirement from DC +10V to +30V.
Specifications
Power requirement : DC voltage input from +10V to +30V. Input: Standard D-Sub 9 pin female connector. Connecting: Host to TRP-C06 (Use standard pin to pin cable). RS-422/485 Output: D-sub 9 pin male connector. Distance: RS-422/485 up to 4000ft . ( 1250M ). Converted signals selectable: RS-422 or RS-485 (Auto switching). Output :RS-485 differential 2 half-duplex wires. RS-422 differential 4 full-duplex wires. Format : Asynchronous data with any combination of bits, parity, stop. LED indicator : Power, TX, RX, indicator. Voltage input type : standard external DC adaptor. Power :1.2 watt. Operating Temperature：0 to 60℃. Storage temperature : -20 to 70℃. Weight : 345g with packing. Humidity : 10-90% non-condensing. Dimension
Accessories
LI-RS232-9M9F	1.8M D-SUB 9 pin female to male cable
PWR-AD-15V(Option)	Mini size power +15V/1.2A DC adaptor
Din-Rail (Option)	Din-Rail